[1]
S. Cosentino, S. Sessa, and A. Takanishi, “Quantitative laughter detection, measurement, and classification - A critical survey,” IEEE Reviews in Biomedical Engineering, vol. PP, no. 99, pp. 1–1, Feb. 2016.
[2]
D. Zhang et al., “Development of subliminal persuasion system to improve the upper limb posture in laparoscopic training: a preliminary study,” Int J CARS, pp. 1–9, Apr. 2015.
[3]
Weisheng Kong et al., “Angular Sway Propagation in One Leg Stance and Quiet Stance with Inertial Measurement Units for Older Adults,” in 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2015, pp. 6955–6958.
[4]
S. Sessa, M. Zecca, L. Bartolomeo, T. Takashima, H. Fujimoto, and A. Takanishi, “Reliability of the step phase detection using inertial measurement units: pilot study,” Healthcare Technology Letters, Mar. 2015.
[5]
S. Sessa et al., “Objective Evaluation of Oral Presentation Skills Using Inertial Measurement Units,” in 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2015, pp. 3117–3120.
[6]
Sarah Cosentino, “Non-verbal interaction and amusement feedback capabilities for entertainment robots,” Waseda University, Tokyo, Japan, 2015.
[7]
Sarah Cosentino, S. Sessa, W. Kong, D. Zhang, N. Bianchi-Berthouze, and Atsuo Takanishi, “Automatic discrimination of laughter using distributed sEMG,” in 2015 International Conference on Affective Computing and Intelligent Interaction (ACII), 2015, pp. 691–697.
[8]
W. Kong et al., “Angular sway propagation in One Leg Stance and quiet stance with Inertial Measurement Units for older adults,” in 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2015, pp. 6955–6958.
[9]
J. Amiguet, S. Sessa, H. Bleuler, and A. Takanishi, “Design of a wearable device for low frequency haptic stimulation,” in 2015 IEEE International Conference on Robotics and Biomimetics (ROBIO), 2015, pp. 297–302.
[10]
D. Zhang et al., “Development of new muscle contraction sensor to replace sEMG for using in muscles analysis fields,” in 2014 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2014, pp. 6945–6948.
[11]
L. Wang et al., “Development of a nerve model of eyeball motion nerves to simulate the disorders of eyeball movements for neurologic examination training,” in 2014 IEEE International Conference on Robotics and Biomimetics (ROBIO), 2014, pp. 707–712.
[12]
C. Wang et al., “Development of a human-like motor nerve model to simulate the diseases effects on muscle tension for neurologic examination training,” in 2014 IEEE International Conference on Robotics and Biomimetics (ROBIO), 2014, pp. 713–718.
[13]
O. Salah et al., “Sit to stand sensing using wearable IMUs based on adaptive Neuro Fuzzy and Kalman Filter,” in 2014 IEEE Healthcare Innovation Conference (HIC), 2014, pp. 288–291.
[14]
T. Okano, S. Sessa, and A. Omar, “Discussion on PBL Class from View Point of Difference of Learning Style between Undergraduate and Graduate Students in Egypt,” Journal of JSEE, vol. 62, no. 5, p. 5_45-5_49, Oct. 2014.
[15]
A. Niibori et al., “Objective skill evaluation of endotracheal intubation using muscle contraction sensor,” in 2014 IEEE International Conference on Robotics and Biomimetics (ROBIO), 2014, pp. 1862–1867.
[16]
W. Kong et al., “Balance analysis of one leg stance for older adults with Inertial Measurement Units,” in 2014 IEEE Healthcare Innovation Conference (HIC), 2014, pp. 307–310.
[17]
T. Kishi et al., “A Robotic Head that Displays Japanese ‘Manga’ Marks,” in Advances on Theory and Practice of Robots and Manipulators, vol. 22, M. Ceccarelli and V. A. Glazunov, Eds. Cham: Springer International Publishing, 2014, pp. 245–253.
[18]
T. Kishi et al., “Development of a comic mark based expressive robotic head adapted to Japanese cultural background,” in Intelligent Robots and Systems (IROS 2014), 2014 IEEE/RSJ International Conference on, 2014, pp. 2608–2613.
[19]
T. Kishi et al., “Bipedal humanoid robot that makes humans laugh with use of the method of comedy and affects their psychological state actively,” in Robotics and Automation (ICRA), 2014 IEEE International Conference on, 2014, pp. 1965–1970.
[20]
U. Imtiaz et al., “Application of wireless inertial measurement units and EMG sensors for studying deglutition - Preliminary results,” in 2014 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2014, pp. 5381–5384.
[21]
T. Ikai, M. Zecca, S. Sessa, and A. Takanishi, “IMU（慣性センサ）による動作解析,” Journal of Clinical Rehabilitation, vol. 23, no. 10, pp. 1000–1005, Oct. 2014.
[22]
S. Cosentino et al., “Natural human–robot musical interaction: understanding the music conductor gestures by using the WB-4 inertial measurement system,” Advanced Robotics, pp. 1–12, 2014.
[23]
S. Cosentino et al., “A multisensory non-invasive system for laughter analysis,” in 2014 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2014.
[24]
A. Asker et al., “ANFIS based Jacobian for a parallel manipulator mobility assistive device,” in 2014 UKACC International Conference on Control (CONTROL), 2014, pp. 395–400.
[25]
M. Zecca et al., “Use of an ultra-miniaturized IMU-based motion capture system for objective evaluation and assessment of walking skills,” in 2013 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2013, pp. 4883–4886.
[26]
S. Sessa, M. Zecca, Z. Lin, L. Bartolomeo, H. Ishii, and A. Takanishi, “A Methodology for the Performance Evaluation of Inertial Measurement Units,” J Intell Robot Syst, vol. 71, no. 2, pp. 143–157, 2013.
[27]
S. Sessa et al., “Walking assessment in the phase space by using ultra-miniaturized Inertial Measurement Units,” in 2013 IEEE International Conference on Mechatronics and Automation (ICMA), 2013, pp. 902–907.
[28]
O. Salah, A. A. Ramadan, S. Sessa, A. A. Ismail, M. Fujie, and A. Takanishi, “ANFIS-based Sensor Fusion System of Sit-to-stand for Elderly People Assistive Device Protocols,” IJAC, vol. 10, no. 5, pp. 405–413, 2013.
[29]
O. Salah et al., “Development of parallel manipulator sit to stand assistive device for elderly people,” in 2013 IEEE Workshop on Advanced Robotics and its Social Impacts (ARSO), 2013, pp. 27–32.
[30]
Z. Lin et al., “Objective Skill Evaluation for Laparoscopic Training Based on Motion Analysis,” IEEE Transactions on Biomedical Engineering, vol. 60, no. 4, pp. 977–985, 2013.
[31]
W. Kong et al., “Development of a real-time IMU-based motion capture system for gait rehabilitation,” in 2013 IEEE International Conference on Robotics and Biomimetics (ROBIO), 2013, pp. 2100–2105.
[32]
T. Kishi et al., “Impression survey of the emotion expression humanoid robot with mental model based dynamic emotions,” in Robotics and Automation (ICRA), 2013 IEEE International Conference on, 2013, pp. 1663–1668.
[33]
U. Imtiaz et al., “Design of a wireless miniature low cost EMG sensor using gold plated dry electrodes for biomechanics research,” in 2013 IEEE International Conference on Mechatronics and Automation (ICMA), 2013, pp. 957–962.
[34]
S. Cosentino et al., “Human-robot emotional interaction: Laughter,” presented at the RSJ 2013 - the 31th annual conference of the robotics society of Japan, Tokyo, Japan, 2013.
[35]
S. Cosentino et al., “Human-humanoid robot social interaction: Laughter,” in 2013 IEEE International Conference on Robotics and Biomimetics (ROBIO), 2013, pp. 1396–1401.
[36]
L. Bartolomeo, M. Zecca, S. Sessa, Z. Lin, H. Ishii, and A. Takahashi, “Induced Mental Stress in Peg Board Training: Motion and Muscle Analysis for Performance Evaluation,” Int J CARS, vol. 8, no. 1, pp. 162–163, 2013.
[37]
L. Bartolomeo et al., “Biomechanical evaluation of the phases during simulated Endotracheal Intubation (ETI): Pilot study on the effect of different laryngoscopes,” in 2013 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2013, pp. 4887–4890.
[38]
Xu PU et al., “Development of WB-4 Wireless Miniaturized Inertial Measurement Unit - Measurement on Posture and Deformation on Foot of Humanoid Robot,” in 13th SICE System Integration Division Annual Conference SI2012, Fukuoka, Japan, 2012, vol. 3N2-4.
[39]
J. Solis, Klaus Petersen, Jumpei Kashiwakura, Yutaka Saitoh, Massimiliano Zecca, and Atsuo Takanishi, “Development of the Waseda Saxophonist Robot No.2 Refined III: New Air Pump and Eye Mechanism,” in The 2nd IFToMM ASIAN Conference on Mechanism and Machine Science (ASIAN-MMS2012), 2012, vol. A5-77.
[40]
K. Saito et al., “Assessment of walking quality by using Inertial Measurement Units,” presented at the ICIES 2012 - International Conference on Innovative Engineering Systems, Alexandria, Egypt, 2012, pp. 13–18.
[41]
Z. Lin, M. Zecca, S. Sessa, L. Bartolomeo, H. Ishii, and A. Takanishi, “Performance Evaluation of the Wireless Inertial Measurement Unit WB-4 with Magnetic Field Calibration,” in IEEE International Conference on Robotics and Biomimetics (ROBIO 2012), Guangzhou, China, 2012, pp. 2219–2224.
[42]
K. Kawamura et al., “Gait Phase Detection using Foot Acceleration for Estimating Ground Reaction Force in Long Distance Gait Rehabilitation,” Journal of Robotics and Mechatronics, vol. 24, no. 5, pp. 828–837, 2012.
[43]
S. Cosentino et al., “Music conductor gesture recognition by using inertial measurement system for human-robot musical interaction,” presented at the ROBIO 2012 - International Conference on Robotics and Biomimetics, Guangzhou, China, 2012, pp. 30–35.
[44]
S. Cosentino et al., “Motion recognition system for conductor and flutist robot interaction,” presented at the RSJ 2012 - THE 30TH ANNUAL CONFERENCE OF THE ROBOTICS SOCIETY OF JAPAN, Sapporo, Japan, 2012, p. 4.
[45]
S. Cosentino et al., “Musical robots: towards a natural joint performance,” presented at the ICIES 2012 - International Conference on Innovative Engineering Systems, Alexandria, Egypt, 2012, pp. 19–24.
[46]
L. Bartolomeo, M. Zecca, S. Sessa, and A. Takanishi, “Wavelet thresholding technique for sEMG denoising by baseline estimation,” International Journal of Computer Aided Engineering and Technology, vol. 4, no. 6, p. 517, 2012.
[47]
L. Bartolomeo, Z. Lin, S. Sessa, M. Zecca, H. Ishii, and A. Takanishi, “Online magnetic calibration of a cutting edge 9-axis wireless Inertial Measurement Unit,” International Journal of Applied Electromagnetics and Mechanics, vol. 39, no. 1, pp. 779–785, 2012.
[48]
L. Bartolomeo et al., “Biomechanical analysis of induced mental stress in laparoscopy surgical training by surface Electromyography,” in Biomedical Robotics and Biomechatronics (BioRob), 2012 4th IEEE RAS EMBS International Conference on, 2012, pp. 1194–1198.
[49]
柏倉淳平 et al., “人間形サキソフォン演奏ロボットの開発―新型口腔部および新型ハンドの設計・製作,” presented at the 第29回日本ロボット学会学術講演会, 2011, vol. J1-5.
[50]
斎藤航平 et al., “人間の運動および生理指標の計測システムに関する研究-手術場面における術者の心理的安定性評価手法の検討,” presented at the 第29回日本ロボット学会学術講演会, 2011, vol. 1N2-7.
[51]
Z. Lin, M. Zecca, S. Sessa, L. Bartolomeo, H. Ishii, and A. Takanishi, “Development of the wireless ultra-miniaturized inertial measurement unit WB-4: Preliminary performance evaluation,” in 2011 Annual International Conference of the IEEE Engineering in Medicine and Biology Society,EMBC, 2011, pp. 6927–6930.
[52]
Z. Lin et al., “Waseda Bioinstrumentation system WB-3 as a wearable tool for objective laparoscopic skill evaluation,” in 2011 IEEE International Conference on Robotics and Automation (ICRA), 2011, pp. 5737–5742.
[53]
L. Bartolomeo et al., “Baseline Adaptive Wavelet Thresholding Technique for sEMG Denoising,” AIP Conference Proceedings, vol. 1371, no. 1, pp. 205–214, 2011.
[54]
L. Bartolomeo et al., “Surface EMG and heartbeat analysis preliminary results in surgical training: Dry boxes and live tissue,” in 2011 Annual International Conference of the IEEE Engineering in Medicine and Biology Society,EMBC, 2011, pp. 1113–1116.
[55]
L. Bartolomeo, Z. Lin, M. Zecca, H. Ishii, and A. Takanishi, “Development of a Cutting Edge 9-axis Wireless Inertial Measurement Unit,” presented at the 15th International Symposium on Applied Electromagnetics and Mechanics, Naples, 2011.
[56]
Y. Mukaeda et al., “顎運動を定量的に計測可能な小型センサの製作,” Journal of Japanese Society for Mastication Science and Health Promotion, vol. 20, 2010.
[57]
Y. Suzuki et al., “Performance evaluation of WB-3 ultra-miniaturized Inertial Measurement Unit - Comparison with VICON system and commercial IMU InertiaCube-,” in Proceedings of 2010 Annual Conference of the Robotics Society of Japan, 2010.
[58]
Y. Suzuki et al., “Objective Evaluation of Laparoscopic Surgical Skills Using Waseda Bioinstrumentation System WB-3,” presented at the 第19回 日本コンピュータ外科学会大会, 2010.
[59]
S. Sessa et al., “Ultra-miniaturized WB-3 Inertial Measurement Unit: Performance evaluation of the attitude estimation,” in 2010 IEEE International Conference on Robotics and Biomimetics (ROBIO), 2010, pp. 998–1003.
[60]
Y. Mukaeda et al., “Performance evaluation of wireless ultra-miniaturized Inertial Measurement Unit,” in SICE System Integration 2010, Sendai, Japan, 2010, vol. 12.
[61]
Y. Morita et al., “Gait analysis system of presumption of method to estimate right and left separated ground reaction force using acceleration sensor,” presented at the WWLS (Welfare, Wellbeing, Life Support) 2010, 2010.
[62]
Z. Lin, M. Zecca, S. Sessa, H. Ishii, and A. Takanishi, “Ultra-Miniaturized Inertial Measurement Unit WB-3 for Jaw Movement Analysis during Free Chewing,” in International Symposium on Robotics and Intelligent Sensors (IRIS2010), Nagoya, Japan, 2010, pp. 213–218.
[63]
Z. Lin, M. Zecca, S. Sessa, H. Ishii, and A. Takanishi, “Development of an Ultra-Miniaturized Inertial Measurement Unit for Jaw Movement Analysis during Free Chewing,” Journal of Computer Science, vol. 6, no. 8, pp. 896–903, 2010.
[64]
Z. Lin et al., “Development of the miniaturized wireless Inertial Measurement Unit WB-4: Pilot test for mastication analysis,” in 2010 IEEE/SICE International Symposium on System Integration (SII), 2010, pp. 420–425.
[65]
Z. Lin et al., “Development of an ultra-miniaturized inertial measurement unit WB-3 for human body motion tracking,” in 2010 IEEE/SICE International Symposium on System Integration (SII), 2010, pp. 414–419.
[66]
M. Zecca, Z. Lin, S. Sessa, T. Sasaki, H. Ishii, and A. Takanishi, “Development of the Inertial Measurement Unit WB-3 - measurement of different movements of the chin,” Journal of Japanese Society for Mastication Science and Health Promotion, vol. 19, pp. 143–144, 2009.
[67]
M. Zecca et al., “Development of an Ultra-Miniaturized Inertial Measurement Unit for Objective Skill Analysis and Assessment in Neurosurgery: preliminary results,” MICCAI 2009, Part I, Lecture Notes in Computer Science 5761, vol. 5671, pp. 443–500, 2009.
[68]
S. Sessa et al., “Objective skill analysis and assessment of neurosurgery by using the waseda bioinstrumentation system WB-3,” in IEEE/RSJ International Conference on Intelligent Robots and Systems, 2009. IROS, 2009, pp. 4086–4091.
[69]
S. Sessa, M. Zecca, Z. Lin, T. Sasaki, K. Itoh, and A. Takanishi, “Waseda Bioinstrumentation System #3 as a tool for objective rehabilitation measurement and assessment - Development of the inertial measurement unit -,” in IEEE International Conference on Rehabilitation Robotics, 2009. ICORR 2009, 2009, pp. 115–120.
[70]
Z. Lin et al., “Objective Skill Analysis and Assessment in Neurosurgery by Using the Waseda Bioinstrumentation System WB-3 : Pilot tests,” in ロボティクス・メカトロニクス講演会講演概要集, 2009, vol. 2009, p. 1A1-L08.
[71]
Z. Lin et al., “Objective skill analysis and assessment in neurosurgery by using an ultra-miniaturized inertial measurement unit WB-3 - Pilot tests,” in Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2009. EMBC 2009, 2009, pp. 2320–2323.
[72]
Z. Lin, M. Zecca, S. Sessa, T. Kusano, K. Itoh, and A. Takanishi, “Waseda Bioinstrumentation system WB-2R as a wearable tool for an objective analysis of surgeon’s performance,” in IEEE/ASME International Conference on Advanced Intelligent Mechatronics, 2009. AIM 2009, 2009, pp. 705–710.
[73]
M. Zecca et al., “Development of the Waseda Bioinstrumentation System WB-2 - the new Inertial Measurement Unit -,” in IEEE International Conference on Robotics and Biomimetics (Robio 2007), Sanya, China, 2007, pp. 139–144.
[74]
M. Zecca et al., “On the development of the Waseda Bioinstrumentation WB-2 - Development of the gyro module,” in Robotics and Mechatronics Conference ROBOMEC2007, Akita, Japan, 2007, p. 1A1-O09.
[75]
M. Zecca et al., “On the development of the Bioinstrumentation System for the evaluation of human-robot interaction - Head and Hands Motion Capture Systems,” in IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM2007), ETH Zürich, Switzerland, 2007, pp. 1–6.
[76]
M. Zecca et al., “Analysis of the Surgeon’s Performance during Laparoscopy by Using the Bioinstrumentation System WB-1R– towards the development of a Global Performance Index -,” in IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), 2007, vol. Analysis and Control of Medical Robots I-TuD7, pp. 1272–1277.
[77]
Y. Mizoguchi et al., “Development of a Bioinstrumentation System for Interaction with a Robot - Motion Capture System of Upper Body using Small Attitude Sensor Modules-,” in 25th Annual Conference of the Robotics Society of Japan (RSJ2007), Chiba Institute of Technology, Chiba, 2007, p. 2012.
[78]
M. Saito et al., “Development of a bioinstrumentation system for interaction with a humanoid robot,” in Kansei Robotics Symposium, Tokyo, Japan, 2006.
[79]
K. Itoh et al., “Mechanisms and Functions for a Humanoid Robot to Express Human-like Emotions,” in IEEE International Conference on Robotics and Automation - ICRA 2006, 2006, p. (poster).
[80]
K. Itoh et al., “Development of a Bioinstrumentation System in the Interaction between a Human and a Robot,” in Intelligent Robots and Systems, 2006 IEEE/RSJ International Conference on, 2006, pp. 2620–2625.
[81]
K. Itoh et al., “Development of a robot evaluation system in the interaction between a humanoid robot and a human,” in Robotics and Mechatronics Conference - ROBOMEC2006, Waseda University, Tokyo, Japan, 2006, p. 2P1-A15.